1205 Needle Valve
Both carbon and stainless steel materials of construction

• Hand, angle, gauge and bleed valves in metal seat or soft seat designs
• Viton® stem and seal designs with NACE trim available
• All stems coated with PTFE for permanent lubrication to 500° F
• Replaceable Delrin® seals
• Mini valves in 1/8" and 1/4" sizes
• Flow recorder manifold valves

R&M Energy Systems supplies a wide assortment of Yale® Hammer Unions for various services such as tank battery applications, production hook-ups and stand-by manifolds.

The Yale line of hammer unions is engineered for maximum versatility:

• Seven figure models
• Sizes from ¼" through 8"
• Over 30 available models feature pressures range from 500 PSI to 12,500 PSI
• Threaded and butt weld configurations

The sealing action of Yale Hammer Unions is not dependent upon metal-to-metal contact. An elastomeric O-ring fits in a precision-machined groove between the metal mating parts. Forced into sealing position at very low initial pressure, the O-ring ensures the utmost safety dependability and economy despite severity of service conditions.